Completely remove ScanInfo fields from Scan Op

aesara/link/jax/dispatch.py

@@ -418,7 +418,7 @@ def jax_funcify_Scan(op, **kwargs):
 
     def scan(*outer_inputs):
         scan_args = ScanArgs(
-            list(outer_inputs), [None] * op.n_outs, op.inputs, op.outputs, op.info
+            list(outer_inputs), [None] * op.info.n_outs, op.inputs, op.outputs, op.info
         )
 
         # `outer_inputs` is a list with the following composite form:

aesara/scan/op.py

@@ -314,12 +314,6 @@ class ScanMethodsMixin:
     def outer_mitmot_outs(self, list_outputs):
         return list_outputs[: self.info.n_mit_mot]
 
-    def mitmot_taps(self):
-        return self.info.mit_mot_in_slices
-
-    def mitmot_out_taps(self):
-        return self.info.mit_mot_out_slices[: self.info.n_mit_mot]
-
     def inner_mitsot(self, list_inputs):
         n_mitmot_taps = sum(len(x) for x in self.info.mit_mot_in_slices)
         ntaps_upto_sit_sot = n_mitmot_taps + sum(
@@ -342,9 +336,6 @@ class ScanMethodsMixin:
             self.info.n_mit_mot : self.info.n_mit_mot + self.info.n_mit_sot
         ]
 
-    def mitsot_taps(self):
-        return self.info.mit_sot_in_slices
-
     def inner_sitsot(self, list_inputs):
         n_taps_upto_sit_sot = sum(
             len(x)
@@ -785,12 +776,6 @@ class Scan(Op, ScanMethodsMixin, HasInnerGraph):
         self.profile = profile
         self.allow_gc = allow_gc
         self.strict = strict
-        self.__dict__.update(dataclasses.asdict(info))
-
-        self.n_mit_mot = self.info.n_mit_mot
-        self.n_mit_mot_outs = self.info.n_mit_mot_outs
-        self.n_mit_sot = self.info.n_mit_sot
-        self.n_sit_sot = self.info.n_sit_sot
 
         # Clone mode_instance, altering "allow_gc" for the linker,
         # and adding a message if we profile
@@ -971,8 +956,8 @@ class Scan(Op, ScanMethodsMixin, HasInnerGraph):
         n_outer_ins = len(inputs) - len(self.outer_nitsot(inputs)) - 1
         n_inner_ins = (
             len(self.inner_seqs(self.inner_inputs))
-            + len(self.mitmot_taps())
-            + len(self.mitsot_taps())
+            + len(self.info.mit_mot_in_slices)
+            + len(self.info.mit_sot_in_slices)
             + len(self.inner_sitsot(self.inner_inputs))
             + len(self.inner_shared(self.inner_inputs))
             + len(self.inner_non_seqs(self.inner_inputs))
@@ -1006,7 +991,11 @@ class Scan(Op, ScanMethodsMixin, HasInnerGraph):
         inner_mitmot = self.inner_mitmot(self.inner_inputs)
         inner_mitmot_outs = self.inner_mitmot_outs(self.inner_outputs)
         for idx, (itaps, otaps, _outer_mitmot) in enumerate(
-            zip(self.mitmot_taps(), self.mitmot_out_taps(), self.outer_mitmot(inputs))
+            zip(
+                self.info.mit_mot_in_slices,
+                self.info.mit_mot_out_slices[: self.info.n_mit_mot],
+                self.outer_mitmot(inputs),
+            )
         ):
             outer_mitmot = copy_var_format(_outer_mitmot, as_var=inner_mitmot[ipos])
             new_inputs.append(outer_mitmot)
@@ -1057,7 +1046,7 @@ class Scan(Op, ScanMethodsMixin, HasInnerGraph):
         inner_mitsots = self.inner_mitsot(self.inner_inputs)
         for idx, (itaps, _outer_mitsot, inner_mitsot_out) in enumerate(
             zip(
-                self.mitsot_taps(),
+                self.info.mit_sot_in_slices,
                 self.outer_mitsot(inputs),
                 self.inner_mitsot_outs(self.inner_outputs),
             )
@@ -1383,9 +1372,7 @@ class Scan(Op, ScanMethodsMixin, HasInnerGraph):
                         output_idx = sum(
                             len(m) for m in info.mit_mot_out_slices[:mitmot_idx]
                         )
-                        output_idx += self.info.mit_mot_out_slices[mitmot_idx].index(
-                            inp_tap
-                        )
+                        output_idx += info.mit_mot_out_slices[mitmot_idx].index(inp_tap)
 
                         preallocated_mitmot_outs.append(output_idx)
 
@@ -1979,7 +1966,7 @@ class Scan(Op, ScanMethodsMixin, HasInnerGraph):
                     if self.mitmots_preallocated[mitmot_out_idx]:
 
                         mitmot_inp_idx = mitmot_inp_grp_offset + taps.index(out_slice)
-                        inner_inp_idx = self.n_seqs + mitmot_inp_idx
+                        inner_inp_idx = info.n_seqs + mitmot_inp_idx
 
                         # Verify whether the input points to the same data as
                         # it did before the execution of the inner function.
@@ -2455,13 +2442,13 @@ class Scan(Op, ScanMethodsMixin, HasInnerGraph):
                 return 1 + iidx
             oidx = 1 + info.n_seqs
             iidx = iidx - info.n_seqs
-            for taps in self.mitmot_taps():
+            for taps in info.mit_mot_in_slices:
                 if len(taps) > iidx:
                     return oidx
                 else:
                     oidx += 1
                     iidx -= len(taps)
-            for taps in self.mitsot_taps():
+            for taps in info.mit_sot_in_slices:
                 if len(taps) > iidx:
                     return oidx
                 else:
@@ -2475,7 +2462,7 @@ class Scan(Op, ScanMethodsMixin, HasInnerGraph):
 
         def get_out_idx(iidx):
             oidx = 0
-            for taps in self.mitmot_out_taps():
+            for taps in info.mit_mot_out_slices[: info.n_mit_mot]:
                 if len(taps) > iidx:
                     return oidx
                 else:
@@ -2666,7 +2653,7 @@ class Scan(Op, ScanMethodsMixin, HasInnerGraph):
         ):
             mintap = min(taps)
             if idx < info.n_mit_mot:
-                outmaxtap = np.max(self.mitmot_out_taps()[idx])
+                outmaxtap = np.max(info.mit_mot_out_slices[: info.n_mit_mot][idx])
             else:
                 outmaxtap = 0
             seq = outs[idx]
@@ -2695,7 +2682,7 @@ class Scan(Op, ScanMethodsMixin, HasInnerGraph):
                 n = n_steps.tag.test_value
             else:
                 n = inputs[0].tag.test_value
-            for taps, x in zip(self.mitsot_taps(), self.outer_mitsot_outs(outs)):
+            for taps, x in zip(info.mit_sot_in_slices, self.outer_mitsot_outs(outs)):
                 mintap = np.min(taps)
                 if hasattr(x[::-1][:mintap], "test_value"):
                     assert x[::-1][:mintap].tag.test_value.shape[0] == n
@@ -2710,7 +2697,7 @@ class Scan(Op, ScanMethodsMixin, HasInnerGraph):
                         assert x[::-1].tag.test_value.shape[0] == n
         outer_inp_seqs += [
             x[::-1][: np.min(taps)]
-            for taps, x in zip(self.mitsot_taps(), self.outer_mitsot_outs(outs))
+            for taps, x in zip(info.mit_sot_in_slices, self.outer_mitsot_outs(outs))
         ]
         outer_inp_seqs += [x[::-1][:-1] for x in self.outer_sitsot_outs(outs)]
         outer_inp_seqs += [x[::-1] for x in self.outer_nitsot_outs(outs)]

aesara/scan/opt.py

@@ -81,31 +81,34 @@ def remove_constants_and_unused_inputs_scan(fgraph, node):
     if not isinstance(node.op, Scan):
         return False
     op = node.op
+    op_info = op.info
     # We only need to take care of sequences and other arguments
-    st = op.n_seqs
-    st += int(sum(len(x) for x in chain(op.mit_mot_in_slices, op.mit_sot_in_slices)))
-    st += op.n_sit_sot
-    st += op.n_shared_outs
+    st = op_info.n_seqs
+    st += int(
+        sum(len(x) for x in chain(op_info.mit_mot_in_slices, op_info.mit_sot_in_slices))
+    )
+    st += op_info.n_sit_sot
+    st += op_info.n_shared_outs
 
     op_ins = op.inner_inputs
     op_outs = op.inner_outputs
 
     # Corresponds to the initial states, which should stay untouched.
     # We put those variables aside, and put them back at the end.
-    out_stuff_inner = op_ins[op.n_seqs : st]
+    out_stuff_inner = op_ins[op_info.n_seqs : st]
 
     non_seqs = op_ins[st:]
     st = (
-        op.n_seqs
-        + op.n_mit_mot
-        + op.n_mit_sot
-        + op.n_sit_sot
-        + op.n_nit_sot
-        + op.n_shared_outs
+        op_info.n_seqs
+        + op_info.n_mit_mot
+        + op_info.n_mit_sot
+        + op_info.n_sit_sot
+        + op_info.n_nit_sot
+        + op_info.n_shared_outs
         + 1
     )
     outer_non_seqs = node.inputs[st:]
-    out_stuff_outer = node.inputs[1 + op.n_seqs : st]
+    out_stuff_outer = node.inputs[1 + op_info.n_seqs : st]
 
     # To replace constants in the outer graph by clones in the inner graph
     givens = {}
@@ -115,7 +118,7 @@ def remove_constants_and_unused_inputs_scan(fgraph, node):
     nw_outer = [node.inputs[0]]
 
     all_ins = list(graph_inputs(op_outs))
-    for idx in range(op.n_seqs):
+    for idx in range(op_info.n_seqs):
         node_inp = node.inputs[idx + 1]
         if (
             isinstance(node_inp, TensorConstant)
@@ -170,7 +173,7 @@ def remove_constants_and_unused_inputs_scan(fgraph, node):
     if len(nw_inner) != len(op_ins):
         op_outs = clone_replace(op_outs, replace=givens)
         nw_info = dataclasses.replace(
-            op.info, n_seqs=nw_n_seqs, n_non_seqs=len(nw_inner_nonseq)
+            op_info, n_seqs=nw_n_seqs, n_non_seqs=len(nw_inner_nonseq)
         )
         nwScan = Scan(
             nw_inner,
@@ -615,7 +618,7 @@ def push_out_seq_scan(fgraph, node):
                 if out in op.inner_mitsot_outs(ls):
                     odx = op.inner_mitsot_outs(ls).index(out)
                     inp = op.outer_mitsot(node.inputs)[odx]
-                    st = abs(np.min(op.mitsot_taps()))
+                    st = abs(np.min(op.info.mit_sot_in_slices))
                     y = set_subtensor(inp[st:], _y)
                 elif out in op.inner_sitsot_outs(ls):
                     odx = op.inner_sitsot_outs(ls).index(out)
@@ -953,7 +956,7 @@ class ScanInplaceOptimizer(GlobalOptimizer):
         op = node.op
 
         # inputs corresponding to sequences and n_steps
-        ls_begin = node.inputs[: 1 + op.n_seqs]
+        ls_begin = node.inputs[: 1 + op.info.n_seqs]
         ls = op.outer_mitmot(node.inputs)
         ls += op.outer_mitsot(node.inputs)
         ls += op.outer_sitsot(node.inputs)
@@ -1044,7 +1047,7 @@ class ScanInplaceOptimizer(GlobalOptimizer):
             # operate inplace.
             out_indices = []
             for out_idx in range(n_outs):
-                inp_idx = 1 + op.n_seqs + out_idx
+                inp_idx = 1 + op.info.n_seqs + out_idx
                 inp = original_node.inputs[inp_idx]
 
                 # If the input is from an eligible allocation node, attempt to
@@ -1153,11 +1156,16 @@ def save_mem_new_scan(fgraph, node):
     # defining ``init_l`` for mit_mot sequences is a bit trickier but
     # it is safe to set it to 0
     op = node.op
-    c_outs = op.n_mit_mot + op.n_mit_sot + op.n_sit_sot + op.n_nit_sot
+    op_info = op.info
+    c_outs = (
+        op_info.n_mit_mot + op_info.n_mit_sot + op_info.n_sit_sot + op_info.n_nit_sot
+    )
 
-    init_l = [0 for x in range(op.n_mit_mot)]
-    init_l += [abs(min(v)) for v in chain(op.mit_sot_in_slices, op.sit_sot_in_slices)]
-    init_l += [0 for x in range(op.n_nit_sot)]
+    init_l = [0 for x in range(op_info.n_mit_mot)]
+    init_l += [
+        abs(min(v)) for v in chain(op_info.mit_sot_in_slices, op_info.sit_sot_in_slices)
+    ]
+    init_l += [0 for x in range(op_info.n_nit_sot)]
     # 2. Check the clients of each output and see for how many steps
     # does scan need to run
 
@@ -1198,8 +1206,8 @@ def save_mem_new_scan(fgraph, node):
     # Note that for mit_mot outputs and shared outputs we can not change
     # the number of intermediate steps stored without affecting the
     # result of the op
-    store_steps = [0 for o in range(op.n_mit_mot)]
-    store_steps += [-1 for o in node.outputs[op.n_mit_mot : c_outs]]
+    store_steps = [0 for o in range(op_info.n_mit_mot)]
+    store_steps += [-1 for o in node.outputs[op_info.n_mit_mot : c_outs]]
     # Flag that says if an input has changed and we need to do something
     # or not
     flag_store = False
@@ -1237,7 +1245,7 @@ def save_mem_new_scan(fgraph, node):
                     break
 
                 # 2.3.2 extract the begin/end of the first dimension
-                if i >= op.n_mit_mot:
+                if i >= op_info.n_mit_mot:
                     try:
                         length = shape_of[out][0]
                     except KeyError:
@@ -1339,7 +1347,7 @@ def save_mem_new_scan(fgraph, node):
                     store_steps[i] = 0
                     break
 
-                if i > op.n_mit_mot:
+                if i > op_info.n_mit_mot:
                     length = node.inputs[0] + init_l[i]
                 else:
                     try:
@@ -1367,9 +1375,9 @@ def save_mem_new_scan(fgraph, node):
                     # the pre-allocation mechanism is activated.
                     prealloc_outs = config.scan__allow_output_prealloc
 
-                    first_mitsot_idx = node.op.n_mit_mot
+                    first_mitsot_idx = op_info.n_mit_mot
                     last_sitsot_idx = (
-                        node.op.n_mit_mot + node.op.n_mit_sot + node.op.n_sit_sot - 1
+                        op_info.n_mit_mot + op_info.n_mit_sot + op_info.n_sit_sot - 1
                     )
                     preallocable_output = first_mitsot_idx <= i <= last_sitsot_idx
 
@@ -1401,18 +1409,18 @@ def save_mem_new_scan(fgraph, node):
         # to store everything in memory ( or ar orphane and required
         # by the inner function .. )
         replaced_outs = []
-        offset = 1 + op.n_seqs + op.n_mit_mot
-        for idx, _val in enumerate(store_steps[op.n_mit_mot :]):
-            i = idx + op.n_mit_mot
+        offset = 1 + op_info.n_seqs + op_info.n_mit_mot
+        for idx, _val in enumerate(store_steps[op_info.n_mit_mot :]):
+            i = idx + op_info.n_mit_mot
             if not (isinstance(_val, int) and _val <= 0 and i not in required):
 
-                if idx + op.n_mit_mot in required:
+                if idx + op_info.n_mit_mot in required:
                     val = 1
                 else:
                     val = _val
                 # If the memory for this output has been pre-allocated
                 # before going into the scan op (by an alloc node)
-                if idx < op.n_mit_sot + op.n_sit_sot:
+                if idx < op_info.n_mit_sot + op_info.n_sit_sot:
                     # In case the input is still an alloc node, we
                     # actually have two options:
                     #   a) the input is a set_subtensor, in that case we
@@ -1442,8 +1450,8 @@ def save_mem_new_scan(fgraph, node):
                         nw_input = nw_inputs[offset + idx][:tmp]
 
                     nw_inputs[offset + idx] = nw_input
-                    replaced_outs.append(op.n_mit_mot + idx)
-                    odx = op.n_mit_mot + idx
+                    replaced_outs.append(op_info.n_mit_mot + idx)
+                    odx = op_info.n_mit_mot + idx
                     old_outputs += [
                         (
                             odx,
@@ -1454,12 +1462,18 @@ def save_mem_new_scan(fgraph, node):
                         )
                     ]
                 # If there is no memory pre-allocated for this output
-                elif idx < op.n_mit_sot + op.n_sit_sot + op.n_nit_sot:
-
-                    pos = op.n_mit_mot + idx + op.n_seqs + 1 + op.n_shared_outs
+                elif idx < op_info.n_mit_sot + op_info.n_sit_sot + op_info.n_nit_sot:
+
+                    pos = (
+                        op_info.n_mit_mot
+                        + idx
+                        + op_info.n_seqs
+                        + 1
+                        + op_info.n_shared_outs
+                    )
                     if nw_inputs[pos] == node.inputs[0]:
                         nw_inputs[pos] = val
-                    odx = op.n_mit_mot + idx
+                    odx = op_info.n_mit_mot + idx
                     replaced_outs.append(odx)
                     old_outputs += [
                         (
@@ -1473,14 +1487,14 @@ def save_mem_new_scan(fgraph, node):
         # 3.4. Recompute inputs for everything else based on the new
         # number of steps
         if global_nsteps is not None:
-            for idx, val in enumerate(store_steps[op.n_mit_mot :]):
+            for idx, val in enumerate(store_steps[op_info.n_mit_mot :]):
                 if val == 0:
                     # val == 0 means that we want to keep all intermediate
                     # results for that state, including the initial values.
-                    if idx < op.n_mit_sot + op.n_sit_sot:
+                    if idx < op_info.n_mit_sot + op_info.n_sit_sot:
                         in_idx = offset + idx
                         # Number of steps in the initial state
-                        initl = init_l[op.n_mit_mot + idx]
+                        initl = init_l[op_info.n_mit_mot + idx]
 
                         # If the initial buffer has the form
                         # inc_subtensor(zeros(...)[...], _nw_input)
@@ -1501,8 +1515,10 @@ def save_mem_new_scan(fgraph, node):
                         else:
                             nw_input = nw_inputs[in_idx][: (initl + nw_steps)]
 
-                    elif idx < op.n_mit_sot + op.n_sit_sot + op.n_nit_sot:
-                        in_idx = offset + idx + op.n_shared_outs
+                    elif (
+                        idx < op_info.n_mit_sot + op_info.n_sit_sot + op_info.n_nit_sot
+                    ):
+                        in_idx = offset + idx + op_info.n_shared_outs
                         if nw_inputs[in_idx] == node.inputs[0]:
                             nw_inputs[in_idx] = nw_steps
 
@@ -1693,8 +1709,8 @@ class ScanMerge(GlobalOptimizer):
         for idx, nd in enumerate(nodes):
             inner_ins[idx].append(rename(nd.op.inner_mitmot(nd.op.inner_inputs), idx))
             inner_outs[idx].append(nd.op.inner_mitmot_outs(nd.op.inner_outputs))
-            mit_mot_in_slices += nd.op.mitmot_taps()
-            mit_mot_out_slices += nd.op.mitmot_out_taps()
+            mit_mot_in_slices += nd.op.info.mit_mot_in_slices
+            mit_mot_out_slices += nd.op.info.mit_mot_out_slices[: nd.op.info.n_mit_mot]
             outer_ins += rename(nd.op.outer_mitmot(nd.inputs), idx)
             outer_outs += nd.op.outer_mitmot_outs(nd.outputs)
 
@@ -1702,14 +1718,14 @@ class ScanMerge(GlobalOptimizer):
         for idx, nd in enumerate(nodes):
             inner_ins[idx].append(rename(nd.op.inner_mitsot(nd.op.inner_inputs), idx))
             inner_outs[idx].append(nd.op.inner_mitsot_outs(nd.op.inner_outputs))
-            mit_sot_in_slices += nd.op.mitsot_taps()
+            mit_sot_in_slices += nd.op.info.mit_sot_in_slices
             outer_ins += rename(nd.op.outer_mitsot(nd.inputs), idx)
             outer_outs += nd.op.outer_mitsot_outs(nd.outputs)
 
         sit_sot_in_slices = ()
         for idx, nd in enumerate(nodes):
             inner_ins[idx].append(rename(nd.op.inner_sitsot(nd.op.inner_inputs), idx))
-            sit_sot_in_slices += tuple((-1,) for x in range(nd.op.n_sit_sot))
+            sit_sot_in_slices += tuple((-1,) for x in range(nd.op.info.n_sit_sot))
             inner_outs[idx].append(nd.op.inner_sitsot_outs(nd.op.inner_outputs))
             outer_ins += rename(nd.op.outer_sitsot(nd.inputs), idx)
             outer_outs += nd.op.outer_sitsot_outs(nd.outputs)
@@ -1802,13 +1818,13 @@ class ScanMerge(GlobalOptimizer):
                     new_inner_outs += inner_outs[idx][gr_idx]
 
         info = ScanInfo(
-            n_seqs=sum(nd.op.n_seqs for nd in nodes),
+            n_seqs=sum(nd.op.info.n_seqs for nd in nodes),
             mit_mot_in_slices=mit_mot_in_slices,
             mit_mot_out_slices=mit_mot_out_slices,
             mit_sot_in_slices=mit_sot_in_slices,
             sit_sot_in_slices=sit_sot_in_slices,
-            n_nit_sot=sum(nd.op.n_nit_sot for nd in nodes),
-            n_shared_outs=sum(nd.op.n_shared_outs for nd in nodes),
+            n_nit_sot=sum(nd.op.info.n_nit_sot for nd in nodes),
+            n_shared_outs=sum(nd.op.info.n_shared_outs for nd in nodes),
             n_non_seqs=n_non_seqs,
             as_while=as_while,
         )

aesara/scan/utils.py

@@ -361,15 +361,19 @@ def scan_can_remove_outs(op, out_idxs):
     required_inputs = list(graph_inputs(non_removable))
 
     out_ins = []
-    offset = op.n_seqs
+    offset = op.info.n_seqs
     for idx, tap in enumerate(
-        chain(op.mit_mot_in_slices, op.mit_sot_in_slices, op.sit_sot_in_slices)
+        chain(
+            op.info.mit_mot_in_slices,
+            op.info.mit_sot_in_slices,
+            op.info.sit_sot_in_slices,
+        )
     ):
         n_ins = len(tap)
         out_ins += [op.inner_inputs[offset : offset + n_ins]]
         offset += n_ins
-    out_ins += [[] for k in range(op.n_nit_sot)]
-    out_ins += [[op.inner_inputs[offset + k]] for k in range(op.n_shared_outs)]
+    out_ins += [[] for k in range(op.info.n_nit_sot)]
+    out_ins += [[op.inner_inputs[offset + k]] for k in range(op.info.n_shared_outs)]
 
     added = True
     out_idxs_mask = [1 for idx in out_idxs]
@@ -400,8 +404,9 @@ def compress_outs(op, not_required, inputs):
     """
     from aesara.scan.op import ScanInfo
 
+    op_info = op.info
     info = ScanInfo(
-        n_seqs=op.info.n_seqs,
+        n_seqs=op_info.n_seqs,
         mit_mot_in_slices=(),
         mit_mot_out_slices=(),
         mit_sot_in_slices=(),
@@ -409,56 +414,58 @@ def compress_outs(op, not_required, inputs):
         n_nit_sot=0,
         n_shared_outs=0,
         n_non_seqs=0,
-        as_while=op.info.as_while,
+        as_while=op_info.as_while,
     )
 
-    op_inputs = op.inner_inputs[: op.n_seqs]
+    op_inputs = op.inner_inputs[: op_info.n_seqs]
     op_outputs = []
-    node_inputs = inputs[: op.n_seqs + 1]
+    node_inputs = inputs[: op_info.n_seqs + 1]
     map_old_new = OrderedDict()
 
     offset = 0
-    ni_offset = op.n_seqs + 1
-    i_offset = op.n_seqs
+    ni_offset = op_info.n_seqs + 1
+    i_offset = op_info.n_seqs
     o_offset = 0
     curr_pos = 0
-    for idx in range(op.info.n_mit_mot):
+    for idx in range(op_info.n_mit_mot):
         if offset + idx not in not_required:
             map_old_new[offset + idx] = curr_pos
             curr_pos += 1
             info = dataclasses.replace(
                 info,
-                mit_mot_in_slices=info.mit_mot_in_slices + (op.mit_mot_in_slices[idx],),
+                mit_mot_in_slices=info.mit_mot_in_slices
+                + (op_info.mit_mot_in_slices[idx],),
                 mit_mot_out_slices=info.mit_mot_out_slices
-                + (op.mit_mot_out_slices[idx],),
+                + (op_info.mit_mot_out_slices[idx],),
             )
             # input taps
-            for jdx in op.mit_mot_in_slices[idx]:
+            for jdx in op_info.mit_mot_in_slices[idx]:
                 op_inputs += [op.inner_inputs[i_offset]]
                 i_offset += 1
             # output taps
-            for jdx in op.mit_mot_out_slices[idx]:
+            for jdx in op_info.mit_mot_out_slices[idx]:
                 op_outputs += [op.inner_outputs[o_offset]]
                 o_offset += 1
             # node inputs
             node_inputs += [inputs[ni_offset + idx]]
         else:
-            o_offset += len(op.mit_mot_out_slices[idx])
-            i_offset += len(op.mit_mot_in_slices[idx])
+            o_offset += len(op_info.mit_mot_out_slices[idx])
+            i_offset += len(op_info.mit_mot_in_slices[idx])
 
-    offset += op.n_mit_mot
-    ni_offset += op.n_mit_mot
+    offset += op_info.n_mit_mot
+    ni_offset += op_info.n_mit_mot
 
-    for idx in range(op.info.n_mit_sot):
+    for idx in range(op_info.n_mit_sot):
         if offset + idx not in not_required:
             map_old_new[offset + idx] = curr_pos
             curr_pos += 1
             info = dataclasses.replace(
                 info,
-                mit_sot_in_slices=info.mit_sot_in_slices + (op.mit_sot_in_slices[idx],),
+                mit_sot_in_slices=info.mit_sot_in_slices
+                + (op_info.mit_sot_in_slices[idx],),
             )
             # input taps
-            for jdx in op.mit_sot_in_slices[idx]:
+            for jdx in op_info.mit_sot_in_slices[idx]:
                 op_inputs += [op.inner_inputs[i_offset]]
                 i_offset += 1
             # output taps
@@ -468,17 +475,18 @@ def compress_outs(op, not_required, inputs):
             node_inputs += [inputs[ni_offset + idx]]
         else:
             o_offset += 1
-            i_offset += len(op.mit_sot_in_slices[idx])
+            i_offset += len(op_info.mit_sot_in_slices[idx])
 
-    offset += op.n_mit_sot
-    ni_offset += op.n_mit_sot
-    for idx in range(op.info.n_sit_sot):
+    offset += op_info.n_mit_sot
+    ni_offset += op_info.n_mit_sot
+    for idx in range(op_info.n_sit_sot):
         if offset + idx not in not_required:
             map_old_new[offset + idx] = curr_pos
             curr_pos += 1
             info = dataclasses.replace(
                 info,
-                sit_sot_in_slices=info.sit_sot_in_slices + (op.sit_sot_in_slices[idx],),
+                sit_sot_in_slices=info.sit_sot_in_slices
+                + (op_info.sit_sot_in_slices[idx],),
             )
             # input taps
             op_inputs += [op.inner_inputs[i_offset]]
@@ -492,23 +500,23 @@ def compress_outs(op, not_required, inputs):
             o_offset += 1
             i_offset += 1
 
-    offset += op.n_sit_sot
-    ni_offset += op.n_sit_sot
+    offset += op_info.n_sit_sot
+    ni_offset += op_info.n_sit_sot
     nit_sot_ins = []
-    for idx in range(op.info.n_nit_sot):
+    for idx in range(op_info.n_nit_sot):
         if offset + idx not in not_required:
             map_old_new[offset + idx] = curr_pos
             curr_pos += 1
             info = dataclasses.replace(info, n_nit_sot=info.n_nit_sot + 1)
             op_outputs += [op.inner_outputs[o_offset]]
             o_offset += 1
-            nit_sot_ins += [inputs[ni_offset + idx + op.n_shared_outs]]
+            nit_sot_ins += [inputs[ni_offset + idx + op_info.n_shared_outs]]
         else:
             o_offset += 1
 
-    offset += op.n_nit_sot
+    offset += op_info.n_nit_sot
     shared_ins = []
-    for idx in range(op.info.n_shared_outs):
+    for idx in range(op_info.n_shared_outs):
         if offset + idx not in not_required:
             map_old_new[offset + idx] = curr_pos
             curr_pos += 1
@@ -526,8 +534,8 @@ def compress_outs(op, not_required, inputs):
     # other stuff
     op_inputs += op.inner_inputs[i_offset:]
     info = dataclasses.replace(info, n_non_seqs=len(op.inner_inputs[i_offset:]))
-    node_inputs += inputs[ni_offset + op.n_shared_outs + op.n_nit_sot :]
-    if op.info.as_while:
+    node_inputs += inputs[ni_offset + op_info.n_shared_outs + op_info.n_nit_sot :]
+    if op_info.as_while:
         op_outputs += [op.inner_outputs[o_offset]]
         map_old_new[o_offset] = len(op_outputs) - 1
         # map_old_new[len(op_outputs)-1] = o_offset

tests/scan/test_utils.py

@@ -97,8 +97,8 @@ def test_ScanArgs():
     # Check the properties that allow us to use
     # `Scan.get_oinp_iinp_iout_oout_mappings` as-is to implement
     # `ScanArgs.var_mappings`
-    assert scan_args.n_nit_sot == scan_op.n_nit_sot
-    assert scan_args.n_mit_mot == scan_op.n_mit_mot
+    assert scan_args.n_nit_sot == scan_op.info.n_nit_sot
+    assert scan_args.n_mit_mot == scan_op.info.n_mit_mot
     # The `scan_args` base class always clones the inner-graph;
     # here we make sure it doesn't (and that all the inputs are the same)
     assert scan_args.inputs == scan_op.inner_inputs