
=============================================
Writing an Op to work on an ``ndarray`` in C
=============================================

So suppose you have looked through the library documentation and you don't see a
function that does what you want.

If you can implement something in terms of existing Ops, you should do that.
Odds are your function that uses existing Theano expressions is short, 
has no bugs, and potentially profits from optimizations that have already been
implemented.

However, if you cannot implement an Op in terms of existing Ops, you have to
write a new one.
Don't worry,
Theano was designed to make it easy to add new Ops, Types, and Optimizations.

This section walks through a non-trivial example Op that does something pretty
weird and unrealistic, that is hard to express with existing Ops.
(Technically, we could use ``Scan`` to implement the Op we're about to describe, 
but we ignore that possibility for the sake of example.)

The following code works, but important error-checking has been omitted for
clarity.  For example, when you write C code that assumes memory is contiguous,
you should check the strides and alignment.


.. If you modify this code, also change :
.. theano/tests/test_tutorial.py:T_fibby.test_fibby_1

.. code-block:: python

  class Fibby(theano.Op):
    """
    An arbitrarily generalized Fibbonacci sequence
    """
    __props__ = ()

    def make_node(self, x):
      x_ = tensor.as_tensor_variable(x)
      assert x_.ndim == 1
      return theano.Apply(self, 
        inputs=[x_],
        outputs=[x_.type()])
      # using x_.type() is dangerous, it copies x's broadcasting behaviour

    def perform(self, node, inputs, output_storage):
      x, = inputs
      y = output_storage[0][0] = x.copy()
      for i in range(2, len(x)):
        y[i] = y[i-1] * y[i-2] + x[i]

    def c_code(self, node, name, inames, onames, sub):
      x, = inames
      y, = onames
      fail = sub['fail']
      return """
        Py_XDECREF(%(y)s);
        %(y)s = (PyArrayObject*)PyArray_FromArray(
                    %(x)s, 0, NPY_ARRAY_ENSURECOPY);
        if (!%(y)s)
            %(fail)s;
        {//New scope needed to make compilation work
            dtype_%(y)s * y = (dtype_%(y)s*)PyArray_DATA(%(y)s);
            dtype_%(x)s * x = (dtype_%(x)s*)PyArray_DATA(%(x)s);
            for (int i = 2; i < PyArray_DIMS(%(x)s)[0]; ++i)
                y[i] = y[i-1]*y[i-2] + x[i];
        }
      """ % locals()

    def c_code_cache_version(self):
      return (1,)

  fibby = Fibby()

At a high level, the code fragment declares a class (``Fibby``) and then
creates one instance of it (``fibby``).
We often gloss over this distinction, but will be precise here:
``fibby`` (the instance) is an Op, not ``Fibby`` (the class which is a subclass of ``theano.Op``).
You can call ``fibby(tensor.vector())`` on a Variable to build an
expression, and in the expression there will be a ``.op`` attribute that refers
to ``fibby``.  

The first two methods in the Op are relatively boilerplate: ``__eq__`` and ``__hash__``.
When two Ops are equal, Theano will merge their outputs if they are applied to the same inputs.
The base class (Op) says two objects are equal if (and only if)
they are the same object.
Writing these boilerplate definitions ensures that the logic of the equality comparison is always explicit.

It is an essential part of the :ref:`op_contract` that if two Ops compare
equal, then they must compute the same result when presented with the same
inputs.  Here, if we allocated another instance of ``Fibby`` by typing ``fibby2
= Fibby()`` then we would have two Ops that behave identically.

When should the implementation of ``__eq__`` be more complicated?
If ``Fibby.__init__`` had parameters, then we could
have configured ``fibby2`` differently from ``fibby`` by passing different
arguments to the constructor. If we had done that, and if that different
configuration made ``fibby2`` compute different results from ``fibby`` (for the
same inputs) then we would have to add logic to the ``__eq__`` and ``__hash__``
function so that he two ``Fibby`` Ops would *not be equal*.  The reason why: Theano's merge
optimization looks for Ops comparing equal and merges them. If two Ops compare
equal but don't always produce equal results from equal inputs, then you might
see wrong calculation.


The ``make_node`` method creates a node to be included in the expression graph.
It runs when we apply our Op (``fibby``) to Variable (``x``), as in ``fibby(tensor.vector())``.
When an Op has multiple inputs, their order in the inputs argument to ``Apply``
is important:  Theano will call ``make_node(*inputs)`` to copy the graph, 
so it is important not to change the semantics of the expression by changing the argument order.



All the ``inputs`` and ``outputs`` arguments to ``Apply`` must be Variables.
A common and easy way to ensure inputs are variables is to run them through
``as_tensor_variable``.  
This function leaves TensorType variables alone, raises an
error for non-TensorType variables, and copies any ``numpy.ndarray`` into the
storage for a TensorType Constant.
The ``make_node`` method dictates the appropriate Type for all output
variables.

The ``perform`` method implements the Op's mathematical logic in Python.
The inputs (here ``x``) are passed by value, 
but a single output is returned indirectly as the first element of
single-element lists.  If ``fibby`` had a second output, it would be stored
in ``output_storage[1][0]``.
.. jpt: DOn't understand the following
In some execution modes, the output storage might
contain the return value of a previous call.  That old value can be reused to avoid
memory re-allocation, but it must not influence the semantics of the Op output.

The ``c_code`` method accepts variable names as arguments (``name``, ``inames``,
``onames``) and returns a C code fragment that computes the expression output.
In case of error, the ``%(fail)s`` statement cleans up and returns properly.
The variables ``%(x)s`` and ``%(y)s`` are set up by the TensorType to be ``PyArrayObject`` pointers.
TensorType also set up ``dtype_%(x)s`` to be a typdef to the C type for ``x``.

In the first two lines of the C function, we make y point to a new array with
the correct size for the output. This is essentially simulating the line
``y = x.copy()``.


.. code-block:: python

    Py_XDECREF(%(y)s);
    %(y)s = (PyArrayObject*)PyArray_FromArray(
        %(x)s, 0, NPY_ARRAY_ENSURECOPY);

The first line reduces the reference count of the data that y originally
pointed to. The second line allocates the new data and makes y point to it.

In C code for a theano op, numpy arrays are represented as ``PyArrayObject`` C
structs. This is part of the numpy/scipy C API documented at 
http://docs.scipy.org/doc/numpy/reference/c-api.types-and-structures.html

TODO: NEEDS MORE EXPLANATION.

There are some important restrictions to remember when implementing an Op.
Unless your Op correctly defines a ``view_map`` attribute, the ``perform`` and ``c_code`` must not
produce outputs whose memory is aliased to any input (technically, if changing the
output could change the input object in some sense, they are aliased). 
Unless your Op correctly defines a ``destroy_map`` attribute, ``perform`` and ``c_code`` must
not modify any of the inputs.

TODO: EXPLAIN DESTROYMAP and VIEWMAP BETTER AND GIVE EXAMPLE.

When developing an Op, you should run computations in DebugMode, by using
argument ``mode='DebugMode'`` to ``theano.function``. DebugMode is
slow, but it can catch many common violations of the Op contract.

TODO: Like what? How? Talk about Python vs. C too.

DebugMode is no silver bullet though.
For example, if you modify an Op ``self.*`` during any of
``make_node``, ``perform``, or ``c_code``, you are probably doing something
wrong but DebugMode will not detect this.

TODO: jpt: I don't understand the following sentence.

Ops and Types should usually be considered immutable -- you should
definitely not make a change that would have an impact on ``__eq__``,
``__hash__``, or the mathematical value that would be computed by  ``perform``
or ``c_code``.


.. _op_contract_fibby:

Writing an Optimization
=======================

``fibby`` of a vector of zeros is another vector of zeros of
the same size.
Theano does not attempt to infer this from the code provided via ``Fibby.perform`` or ``Fibby.c_code``.
However, we can write an optimization that makes use of this observation.
This sort of local substitution of special cases is common,
and there is a stage of optimization (specialization) devoted to such optimizations.
The following optimization (``fibby_of_zero``) tests whether the input is
guaranteed to be all zero, and if so it returns the input itself as a replacement
for the old output.

TODO: talk about OPTIMIZATION STAGES

.. If you modify this code, also change :
.. theano/tests/test_tutorial.py:T_fibby.test_fibby_1

.. code-block:: python

  from theano.tensor.opt import get_scalar_constant_value, NotScalarConstantError

  # Remove any fibby(zeros(...))
  @theano.tensor.opt.register_specialize
  @theano.gof.local_optimizer([fibby])
  def fibby_of_zero(node):
    if node.op == fibby:
      x = node.inputs[0]
      try:
        if numpy.all(0 == get_scalar_constant_value(x)):
          return [x]
      except NotScalarConstantError:
        pass

The ``register_specialize`` decorator is what activates our optimization, and
tells Theano to use it in the specialization stage.
The ``local_optimizer`` decorator builds a class instance around our global
function.  The ``[fibby]`` argument is a hint that our optimizer works on nodes
whose ``.op`` attribute equals ``fibby``.
The function here (``fibby_of_zero``) expects an ``Apply`` instance as an
argument for parameter ``node``. It tests using
function ``get_scalar_constant_value``, which determines if a
Variable (``x``) is guaranteed to be a constant, and if so, what constant.

Test the optimization
=====================

Here is some code to test that the optimization is applied only when needed.

.. code-block:: python

        # Test it does not apply when not needed
        x = T.dvector()
        f = function([x], fibby(x))
        #theano.printing.debugprint(f)

        # We call the function to make sure it runs.
        # If you run in DebugMode, it will compare the C and Python outputs.
        f(numpy.random.rand(5))
        topo = f.maker.fgraph.toposort()
        assert len(topo) == 1
        assert isinstance(topo[0].op, Fibby)

        # Test that the optimization gets applied.
        f_zero = function([], fibby(T.zeros([5])))
        #theano.printing.debugprint(f_zero)

        # If you run in DebugMode, it will compare the output before
        # and after the optimization.
        f_zero()

        # Check that the optimization removes the Fibby Op.
        # For security, the Theano memory interface ensures that the output
        # of the function is always memory not aliased to the input.
        # That is why there is a DeepCopyOp op.
        topo = f_zero.maker.fgraph.toposort()
        assert len(topo) == 1
        assert isinstance(topo[0].op, theano.compile.ops.DeepCopyOp)
