
.. _views_and_inplace:

============================
Views and inplace operations
============================

Theano allows the definition of Ops which return a :term:`view` on one
of their inputs or operates :term:`inplace` on one or several
inputs. This allows more efficient operations on numpy's ``ndarray``
data type than would be possible otherwise.
However, in order to work correctly, these Ops need to
implement an additional interface.

Theano recognizes views and inplace operations specially. It ensures
that they are used in a consistent manner and it ensures that
operations will be carried in a compatible order.

An unfortunate fact is that it is impossible to return a view on an
input with the ``double`` type or to operate inplace on it (Python
floats are immutable). Therefore, we can't make examples of these
concepts out of what we've just built. Nonetheless, we will present
the concepts:

.. _views:

Views
=====

A "view" on an object ``x`` is an object ``y`` which shares memory
with ``x`` in some way. In other words, changing ``x`` might also
change ``y`` and vice versa. For example, imagine a ``vector`` structure
which contains two fields: an integer length and a pointer to a memory
buffer. Suppose we have:

::

   x = vector {length: 256,
               address: 0xDEADBEEF}

   y = vector {length: 224,
               address: 0xDEADBEEF + 0x10}

   z = vector {length: 256,
               address: 0xCAFEBABE}


So ``x`` uses the memory range ``0xDEADBEEF - 0xDEADBFEF``, ``y`` the
range ``0xDEADBEFF - 0xDEADBFDF`` and z the range ``0xCAFEBABE -
0xCAFEBBBE``. Since the ranges for ``x`` and ``y`` overlap, ``y`` is
considered to be a view of ``x`` and vice versa.

Suppose you had an Op which took ``x`` as input and returned
``y``. You would need to tell Theano that ``y`` is a view of ``x``. For this
purpose, you would set the ``view_map`` field as follows:


.. code-block:: python

   myop.view_map = {0: [0]}


What this means is that the first output (position 0) is a view of the
first input (position 0). Even though the interface allows a list of
inputs that are viewed by a given output, this feature is currently
unsupported. Here are more examples:


.. code-block:: python

   myop.view_map = {0: [0]} # first output is a view of first input
   myop.view_map = {0: [1]} # first output is a view of second input
   myop.view_map = {1: [0]} # second output is a view of first input

   myop.view_map = {0: [0], # first output is a view of first input
                    1: [1]} # *AND* second output is a view of second input

   myop.view_map = {0: [0], # first output is a view of first input
                    1: [0]} # *AND* second output is *ALSO* a view of first input

   myop.view_map = {0: [0, 1]} # THIS IS NOT SUPPORTED YET! Only put a single input number in the list!


.. _inplace:


Inplace operations
==================

An inplace operation is one that modifies one or more of its
inputs. For example, the expression ``x += y`` where ``x`` and ``y``
are ``numpy.ndarray`` instances would normally represent an inplace
operation on ``x``.

.. note::

   Inplace operations in Theano still work in a functional setting:
   they need to return the modified input. Symbolically, Theano
   requires one Variable standing for the input *before* being modified
   and *another* Variable representing the input *after* being
   modified. Therefore, code using inplace operations would look like
   this:

   .. code-block:: python

      x, y = dscalars('x', 'y')
      r1 = log(x)

      # r2 is x AFTER the add_inplace - x still represents the value before adding y
      r2 = add_inplace(x, y)

      # r3 is log(x) using the x from BEFORE the add_inplace
      # r3 is the SAME as r1, even if we wrote this line after the add_inplace line
      # Theano is actually going to compute r3 BEFORE r2
      r3 = log(x)

      # this is log(x) using the x from AFTER the add_inplace (so it's like log(x + y))
      r4 = log(r2)

   Needless to say, this goes for user-defined inplace operations as
   well: the modified input must figure in the list of outputs you
   give to ``Apply`` in the definition of ``make_node``.

   Also, for technical reasons but also because they are slightly
   confusing to use as evidenced by the previous code, Theano does not
   allow the end user to use inplace operations by default. However,
   it does allow *optimizations* to substitute them in in a later
   phase. Therefore, typically, if you define an inplace operation,
   you will define a pure equivalent and an optimization which
   subsitutes one for the other. Theano will automatically verify if
   it is possible to do so and will refuse the substitution if it
   introduces inconsistencies.


Take the previous definitions of ``x``, ``y`` and ``z`` and suppose an Op which
adds one to every byte of its input. If we give ``x`` as an input to
that Op, it can either allocate a new buffer of the same size as ``x``
(that could be ``z``) and set that new buffer's bytes to the variable of
the addition. That would be a normal, :term:`pure` Op. Alternatively,
it could add one to each byte *in* the buffer ``x``, therefore
changing it. That would be an inplace Op.

Theano needs to be notified of this fact. The syntax is similar to
that of ``view_map``:


.. code-block:: python

   myop.destroy_map = {0: [0]}


What this means is that the first output (position 0) operates inplace on the
first input (position 0).


.. code-block:: python

   myop.destroy_map = {0: [0]} # first output operates inplace on first input
   myop.destroy_map = {0: [1]} # first output operates inplace on second input
   myop.destroy_map = {1: [0]} # second output operates inplace on first input

   myop.destroy_map = {0: [0], # first output operates inplace on first input
                       1: [1]} # *AND* second output operates inplace on second input

   myop.destroy_map = {0: [0], # first output operates inplace on first input
                       1: [0]} # *AND* second output *ALSO* operates inplace on first input

   myop.destroy_map = {0: [0, 1]} # first output operates inplace on both the first and second input
   # unlike for views, the previous line is legal and supported


Destructive Operations
======================

While some operations will operate inplace on their inputs, some might
simply destroy or corrupt them. For example, an Op could do temporary
calculations right in its inputs. If that is the case, Theano also
needs to be notified. The way to notify Theano is to assume that some
output operated inplace on whatever inputs are changed or corrupted by
the Op (even if the output does not technically reuse any of the
input(s)'s memory). From there, go to the previous section.


.. warning::
   Failure to correctly mark down views and inplace operations using
   ``view_map`` and ``destroy_map`` can lead to nasty bugs. In the
   absence of this information, Theano might assume that it is safe to
   execute an inplace operation on some inputs *before* doing other
   calculations on the *previous* values of the inputs. For example,
   in the code: ``y = log(x); x2 = add_inplace(x, z)`` it is
   imperative to do the logarithm before the addition (because after
   the addition, the original x that we wanted to take the logarithm
   of is gone). If Theano does not know that ``add_inplace`` changes
   the value of ``x`` it might invert the order and that will
   certainly lead to erroneous computations.

   You can often identify an incorrect ``view_map`` or ``destroy_map``
   by using :ref:`DebugMode`.  *Be sure to use DebugMode when developing
   a new Op that uses ``view_map`` and/or ``destroy_map``.*

Inplace optimization and DebugMode
==================================

It is recommended that during the graph construction, all op are not inplace. 
Then an optimization replace them with an inplace one. Currently DebugMode check
all optimization that was tryed even if they got rejected. One reason an inplace
optimization can get rejected is that their is another op that already do an
inplace on the same input. A second reason to reject an inplace optimization is
if it introduce cycle into the graph.

To allow using DebugMode more often, we can pre-check that our optimization will
get rejected in many case.(not the cycle reason). For this you can use the 
theano.gof.destroyhandler.fast_inplace_check() function that will tell you which 
op can be used.


.. _optdb:
